Output Characteristic Frequency for all modes is 500KHz
| Mode | Power (typical) | P/P Voltage (maximum open circuit) |
| Cut | 350 W 500Ohm | 2000V |
| Cut Blend 1.5 | 320 W 500Ohm | 3600V |
| Coag Pinpoint | 130 W 500Ohm | 4000V |
| Coag Spray | 75 W 500Ohm | 8000V |
| Cut Bipolar | 50 W 125Ohm | 550 V |
| Coag Bipolar | 50W 125Ohm | 1280V |
| Input Characteristics | Maximum control setting into ohm load |
| Model 132030, 132036 | Models 132031, 132033, 132034, 132035 |
| 115 VAC 60 Hz | 220/240 VAC 50 Hz |
| Idle: 0.6 A | Idle: 0.3 A |
| Cut: 12 A | Cut: 6 A |
| Coag: 6 A | Coag: 3A |
| Risk Currents | R.F. high frequency | |
| Mode | Patient to Ground | Active to Ground |
| Cut Pure | 100 ma | 100 ma |
| Coag Pinpoint | 70 ma | 70 ma |
| Coag Spray | 125 ma | 120 ma |
| Coag Bipolar | 105 ma | 95 ma |
| Coag Bipolar | 95 ma | 90 ma |
| Dimensions | 8”H x 18”W x 19”D (20 cm x 46 cm x 49 cm) |
| Weight | 43 lbs (19 kg) |
| Internal Design | Solid State |
| Cooling | Convection (No Fan) |
| Output Configurations | RF Floating (Isolated) |